:	Oct 27, 2005

: It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.

: Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse connect the battery.

.

Make the SRS system safe.

.

:   Torx bolts may be re-used. Release the front seat.   Remove the bolt covers.   Remove and the 5 Torx bolts.

.

Release the safety belt lower anchor from the seat.   Remove the bolt cover.   Passenger side, disconnect the electrical connector.   Remove and discard the Torx bolt.

.

With assistance, remove the front seat.   Protect the rocker panel.   Remove the bolt.   Disconnect the 2 electrical connectors.   Release the 2 wiring harness clips.

.

With assistance, install the front seat.   Connect the electrical connectors.   Secure the wiring harness clips.

.

Attach the safety belt lower anchor to the seat.   Tighten the new Torx bolt to 40 Nm (30 lb.ft).   Passenger side, connect the electrical connector.   Install the bolt cover.

.

Secure the front seat.   Tighten the Torx bolts to 40 Nm (30 lb.ft).   Install the bolt covers.

.

Connect the battery ground cable.